PORTAPACK H2 For HACKRF ONE SDR + 0.5ppm TCXO + 1500mAh Battery + 3.2" Touch LCD

    PORTAPACK H2 For HACKRF ONE SDR + 0.5ppm TCXO + 1500mAh Battery + 3.2" Touch LCD Specification & Description Summary

    PORTAPACK H2 For HACKRF ONE SDR + 0.5ppm TCXO + 1500mAh Battery + 3.2" Touch LCD Specification

    • Brand NameLISCN
    • Item Type10
     
    Latest PORTAPACK For HACKRF ONE SDR + 0.5ppm TCXO + 1500mAh Battery + 3.2 inch touch LCD
     
    Note:  PortaPack does not include a HackRF One and the meta case .only Portapack 
     
         616263656667
           

     

    Need to flash the firmware from the below link  before using :

     

    https://github.com/sharebrained/portapack-hackrf/releases

     

    more information you can go to this web:

     

    https://github.com/sharebrained/portapack-hackrf

     

    https://www.youtube.com/results?search_query=PORTAPACK

     
    How to flash the firmware
     
    1,Confirm your hackrf flash firmware is the version of 2017.02.1.

    2. Confirm that the hackrf CPLD is version 2017.02.1  https://github.com/mossmann/hackrf/releases/tag/v2017.02.1       https://github.com/mossmann/hackrf/wiki/Updating-Firmware
     
    Step 2: Updating the CPLD
     
    3. flash portapack official latest firmware  https://github.com/sharebrained/portapack-hackrf/releases 4. Install portapack in the off state without touching any circuit other than the ground.
     
    4. Power on
     
     

    According to source code: github.com/sharebrained/portapack-hackrf

    Redesign this hardware and share it to the enthusiast.

     

    Progress of work:

    1. has completed the program validation prototype.

    2. the latest 2017.5 month documents are based on improvements.

          
        

    Hardware configuration:

     

    1.TFT 240*320 screen,3.2 inch touch LCD

    2. navigation switch 

    3. audio output

    4. microphone input

    5.DC2.1 interface

    6.4 layer gold plate

    7.ROSH process (exported to Europe and America)

     

    The latest version is updated with the latest documents in 2017.5 month

     

     

     

    Add a PortaPack  to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack  attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, micro SD card slot,

    Just add a USB battery, and you're ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware).

     

    SPECIFICATIONS

    • 3.2 inch, 240 x 320 RGB LCD with resistive touch panel.
    • Four-way arrow keys, rotary jog wheel, and select button.
    • Coin battery for preserving settings and date/time.
    • Micro SD card slot for data and code storage
     

    Some features demonstrated in 2016 February 22 firmware video:

    • SSB, AM, narrowband FM, wideband FM audio reception, with spectrum waterfall.
    • Wideband (18MHz) spectrum analysis and waterfall.
    • Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT).
    • HackRF mode runs HackRF firmware for use with host computer SDR software.
    • PPM calibration for more accurate tuning.
    • Sleep mode saves power by turning off just the display.
    •  

    You may also find the Furrtek HAVOC firmware very interesting!

    Some assembly is required. .

     

    Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into "HackRF Mode".

    PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems.

    PortaPack  requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio.

    The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receive

     

     

    Product Details
    PORTAPACK H2 For HACKRF ONE SDR + 0.5ppm TCXO + 1500mAh Battery + 3.2" Touch LCD

    Closeout Deals. Hot Deals

    € 95,91
    4.8
    (based on 52 user reviews)
    Producer: MaJack
    Identifier: 4000178925159
    Volume Retail Sales: MaJack piece
    Availability: 433 pieces
    Last Update : Fri, 04 Dec 2020
  • follow us