Power-Supply Abs-Case Sd-Card 4-Model-B-Kit Raspberry Pi Pi 4 Heatsink Fan 32GB for Reader

    Power-Supply Abs-Case Sd-Card 4-Model-B-Kit Raspberry Pi Pi 4 Heatsink Fan 32GB for Reader Specification & Description Summary

    Power-Supply Abs-Case Sd-Card 4-Model-B-Kit Raspberry Pi Pi 4 Heatsink Fan 32GB for Reader Specification

    • Brand NameRaspberry pi
    • Demo Board TypeARM
    • OriginGB(Origin)
    • InterfaceHDMI/RCA Output

    Original Raspberry Pi 4 Model B Kit 2/4/8GB RAM + ABS Case + Power Supply + Fan + Heatsink +HDMI Cable Optional 64 32GB SD Card for Pi 4

    Choose Bundle :

    We provide bundle 1 to bundle 6 to choose , each bundle contain different packing list , please choose the correct bundle you want and check carefully.

    Introduction :

    This is the Raspberry Pi 4 Model B kit , which include ABS case , fan , heat sink , HDMI cable , power adapter , screwdriver , SD card and reader . We provide A to D 4 kind of ABS case to choose , they both support to install cooling fan. Please tell us which case you want in the order page (messahe for seller), otherwise we will send the case A.

    Choose ABS Case :

    1. We provide A to D 4 kind of ABS case to choose , they both support to install cooling fan. 2. Case A and B is the dual using case , they can use as general case to install cooling fan , also can install the 3.5 inch touch screen (but can not install the screen and fan at the same time).3. The case D has a removable GPIO cover. You can cut the GPIO cover by knife (please be careful when cutting) , if you need not use the GPIO , you can remain the GPIO cover.4. All case has black and transparent color , if you don't leave a message in the order page for color , we send the black one default.5. If you don't tell us which case you want in the order page , we will send case A in black default.

    Case A & B

    The case A and B is dual using case , they can install the 3.5 inch touch screen , or install the cooling fan. But You can not install the LCD and fan at the same timeIf you use the GPIO usually , we suggest you choose case B (remain GPIO port on cover) Please note that this link is not include the LCD.

    Cooling Fan :

    The fan is supplied power by GPIO of Raspberry Pi.It has two model:When connect to 5V input , it run by full speed.When connect to 3.3V , it run silent.You can choose the model as you want.The size of fan is 30x30x8 mm approx , can cooling the Raspberry Pi well , provent the over heating.

    Power Adapter :

    1. Interface : USBC2. Input : 100 - 240V , 0.3A , 50/60Hz AC3. Output : 5V 3A , DC4. Plug : EU / US / UK / AU ( leave a message in the order page for the type you want )5. Power wire : with ON/OFF switch button on it , to cut off or start the power , the length is about 95cm

    SD Card :

    1. 64GB , 32GB optional capacity2. Class 10 standard3. With USB 2.0 SD card reader

    HDMI Cable :

    1. Micro HDMI to HDMI 2. Male to male3. 1.5m length approx

    Heat Sink :

    1. 4 copper heat sinks , for CPU , RAM , Ethernet card and USB control module on PCB . Copper conducts heat quickly and efficiently and is durable2. With self stick thermal conductive adhesive on the back , easy to use.

    Packing list :

    Different bundle contain different packing list , please check it carefully.

    Bundle 1 :

    1 x Raspberry Pi 4 Model B (4GB RAM)1 x ABS case1 x Cooling fan4 x Heat sinks1 x Micro HDMI cable1 x Screwdriver1 x Switch power adapter1 x 64GB SD card1 x SD card reader

    Bundle 2 :

    1 x Raspberry Pi 4 Model B (4GB RAM)1 x ABS case1 x Cooling fan4 x Heat sinks1 x Micro HDMI cable1 x Screwdriver1 x Switch power adapter1 x 32GB SD card1 x SD card reader

    Bundle 3 :

    1 x Raspberry Pi 4 Model B (8GB RAM)1 x ABS case1 x Cooling fan4 x Heat sinks1 x Micro HDMI cable1 x Screwdriver1 x Switch power adapter1 x 64GB SD card1 x SD card reader

    Bundle 4 :

    1 x Raspberry Pi 4 Model B (2GB RAM)1 x ABS case1 x Cooling fan4 x Heat sinks1 x Micro HDMI cable1 x Screwdriver1 x Switch power adapter1 x 64GB SD card1 x SD card reader

    Bundle 5 :

    1 x Raspberry Pi 4 Model B (2GB RAM)1 x ABS case1 x Cooling fan4 x Heat sinks1 x Micro HDMI cable1 x Screwdriver1 x Switch power adapter1 x 32GB SD card1 x SD card reader

    Bundle 6 :

    1 x Raspberry Pi 4 Model B (8GB RAM)1 x ABS case1 x Cooling fan4 x Heat sinks1 x Micro HDMI cable1 x Screwdriver1 x Switch power adapter1 x 32GB SD card1 x SD card reader

    Raspberry Pi 4 Model B :

    Processor: Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHzMemory: 1GB, 2GB or 4GB LPDDR4 (depending on model)Connectivity: 2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless LAN, Bluetooth 5.0, BLE Gigabit Ethernet2 × USB 3.0 ports2 × USB 2.0 ports.Video & sound: 2 × micro HDMI ports (up to 4Kp60 supported)2-lane MIPI DSI display port2-lane MIPI CSI camera port4-pole stereo audio and composite video portMultimedia: H.265 (4Kp60 decode);H.264 (1080p60 decode, 1080p30 encode);OpenGL ES, 3.0 graphics

    Product Details
    Power-Supply Abs-Case Sd-Card 4-Model-B-Kit Raspberry Pi Pi 4 Heatsink Fan 32GB for Reader

    Ultimate Sale. Hot Deals

    € 49,73 - 94,18
    4.9
    (based on 236 user reviews)
    Producer: MaJack
    Identifier: 4000378054837
    Volume Retail Sales: MaJack piece
    Availability: 941 pieces
    Last Update : Fri, 04 Dec 2020
  • follow us